Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Create a Wireless 3 Way with out adding wire

  1. #1
    Junior Member
    Join Date
    Mar 2021
    Posts
    1

    Create a Wireless 3 Way with out adding wire

    I have a bath room with two doors and switches at both doors. Only one switch controls the overhead light (1 way). The other switch used to control an outside light in a 3 way configuration. It no longer does. I would like to find a solution to make that switch act as a 3 way with out the wire to control the over head light. The slave switch would use RF to communicate with the main switch. There is power in the single gang slave box. If the solution is battery powered I am ok with that. Can I use two Lutron PD-5S-D to do this? This would work but it no longer exists. https://www.amazon.com/Leviton-Anywh.../dp/B00004YUOL Does Lutron make something like that?

  2. #2
    Junior Member
    Join Date
    Jan 2021
    Posts
    13
    Hello,Lutron does offer a switch similar to the Leviton product linked: the PD-5WS-DV. This is essentially an updated version of the PD-5S-DV designed for Caseta. it can be used with a PJ2-2B-GWH-L01 Pico remote mounted in a PICO-WBX-ADAPT next to the existing switch and covered with a 2-gang plate. The Pico will be battery powered, but under normal use the batteries should last about 10 years.

Similar Threads

  1. Looking for Lutron Venetian Blind 4-wire connector & guide wire part number
    By kaiser_will in forum General Discussion - General Commercial
    Replies: 5
    Last Post: 12-12-2023, 07:37 PM
  2. Create Groups
    By Squill in forum Programming - CAS
    Replies: 3
    Last Post: 12-19-2021, 10:09 AM
  3. Adding to wireless ceiling fan/light combo.
    By KitzyKitt in forum Design Assistance - CAS
    Replies: 1
    Last Post: 05-09-2020, 12:07 AM
  4. Advice on adding WIRELESS shades to WIRED link?
    By jwbcinergy in forum General Discussion - HWQS
    Replies: 8
    Last Post: 02-25-2018, 07:30 PM
  5. How does Caseta wireless work without Neutral wire?
    By skatn1729 in forum General Discussion - CAS
    Replies: 2
    Last Post: 05-24-2017, 08:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •