Hi everyone,So I installed RA2 in my house myself by doing the essentials training and going through all that which was pretty easy. I have about 100 dimmers/switches/keypads etc and have had it for about 2 years with no issue.I want to get automated shades in some of the rooms and would prefer ones by Lutron that integrate with RA2. I just had a few questions regarding them I was hoping someone could help out with before I reach out to dealers and get on their sales radar. :)1) I assume these must be purchased via a special quote from a dealer which probably must be installed by them? No self-install? I'm okay with that but just curious if it's ever possible to just order what I need. Not overly keen on having someone in my house right now with Covid so would probably wait.2) Assuming it has to be sold and professionally installed, would there be any issue with me self installing my RA2? Like ideally I just want the dealer to install them, but I'd want to pair them to the main repeater and program them but wondering if that's normally okay, or if a dealer would insist on managing the whole system and so on. I really just want to buy them, have them installed, and then I program them on RA2 and the keypads etc.I use HomeSeer, Hubitat, HomeKit etc, so I have lots of ways to integrate RA2 keypads with any automated blinds but figure it's easier going with Lutron. Just wanted to check if anyone had any feedback on the above before I start looking at getting quotes. Thanks so much.Uh what the hell, I posted it and it removed all my spaces after periods and all my line spacing. Hopefully everyone can still read this as no matter what I do it keeps saving it as one giant paragraph. :/
now tv canlı