Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: App and bridge issues

  1. #1
    Junior Member
    Join Date
    Feb 2021
    Posts
    1

    App and bridge issues

    Recently extracted file and added several zones to an existing system. Was only able to find repeater and bridge while plugged directly into them, could not find on WiFi. After eventually completing transfer customer was no longer able to access system on either iPhone or iPad. Both had existing connect apps that were previously functioning. I was able to gain temporary access to system on my iPhone through connect app no problem. On both of the customers devices I was able to manually input bridge ip and the system started to sink but then froze on “downloading data”. Customer has 2 different wireless routers with separate WiFi networks. After switching repeater and bridge to a different switch on the other router and network iPad sinked up no problem. 2 hours later customer was not able to connect to system on his iPhone and iPad was not able to either.

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post Joesnothome.

    Seems like we may be encounter Telnet lockout. We would suggest pull a support file from the processor and email into systemsupport@lutron.com for us to investigate this further with you. Hope this helps!

  3. #3
    Junior Member
    Join Date
    Jun 2020
    Posts
    11

    Resolution

    Will be interested to see the resolution to Telnet lockout. Is a problem we have been having. Any suggestions on how to resolve. Happens at one site about every 3 weeks.

  4. #4
    Lutron Technical Support
    Join Date
    Sep 2020
    Posts
    103
    Hello! The best resolution we can suggest is to pull a support file from the Main Repeater via the RA2 Essentials/Inclusive software and send it to systemsupport@lutron.com to find the source of the lock out event.

Similar Threads

  1. Problems upgrading from old CONNECT bridge to new bridge
    By BradInToronto in forum Programming - RA2
    Replies: 7
    Last Post: 04-23-2021, 11:48 AM
  2. Any gotchas with Caseta Pro Bridge vs regular bridge? Other than cost.
    By gadgetfan in forum Design Assistance - CAS
    Replies: 2
    Last Post: 09-11-2020, 11:09 AM
  3. Connect Bridge and Araknis Network Issues
    By DavidGroves in forum General Discussion - HWQS
    Replies: 8
    Last Post: 01-30-2019, 12:02 AM
  4. Upgrading from Connect Bridge to HomeKit Bridge
    By Lukeetal in forum Best Practices - RA2
    Replies: 1
    Last Post: 04-19-2017, 06:17 PM
  5. RadioRa 2 issues finding Connect Bridge
    By nwaudio in forum Troubleshooting - RA2
    Replies: 8
    Last Post: 12-12-2016, 03:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •