Caseta controlling 0-10 volt dimming light... possible workaround??

[Stevemo]

Currently, the only way to control 0-10V loads with Caseta requires you to have 2 devices:
You would need to use the PD-10NXD dimmer, and you would need to wire it to the GRX-TVI interface.

Is this still the preferred method? I am putting commercial high bay LED lights in my garage that are 1.5 amps each and they use the 0-10 V dimming.

[Jonathan K.]

Yes. The only way to dim 0-10V fixtures in Caséta is with a PD-10NXD wired to a GRX-TVI connected to the 0-10V ballast/driver. If you are using a RA2 Select System, the 0-10V Dimming Module (LMJ-5T-DV-B) is a good option.

[Stevemo]

Great, thank you for the response.