I was at a home last week and moved some loads from one switch to another at a remote junction box (moved hot tub lights from being on with land scape to pool). admittedly I did move the loads with the switches on so I could find the appropriate wires in the junction box, however nothing shorted and it was a simple remove a wire from a marrette, and install it under another (both loads are on the same circuit, and same neutral). I got a call from the homeowner later and she says that when she turned on the lights (at rrd-w6) they turn on, but no longer can she turn them off. If she pulls the airgap on the 10nd they turn off, but when she presses it in they turn back on. manually pressing the 10nd does not turn them off. They will dim however. No programing was done, so its not like something was changed there. Julian