Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Maestro flashes on full power

  1. #1
    Junior Member
    Join Date
    Nov 2019
    Posts
    13

    Maestro flashes on full power

    I know I need to provide more information (led bulb type etc but this is all i have for now). I have an apartment where the homeowner has several maestro dimmers (led compatible). On the switches where there are 4 or less mr16 bulbs they work flawlessly. On the switches with 5 or more mr16s they flash on and off when at full brightness. This only happens at full brightness, up until full they work great. Is there a way to set a top level trim, or is he going to have to change out the relevant dimmers? None of the effected dimmers are 3 ways. he had maestro dimmers before on incandescent and had all his bulbs changed by a caretaker to "dimmable led" He then had us install the led compatible dimmers, and asked for the maestro because he liked them. The issue wasn't noticed at the time of install as it's a bit intermittent.any suggestions?Thanks

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,104
    LED compatible (MACL-153, MA-PRO) have high and low end trim adjustment. See link below.

    https://www.lutron.com/TechnicalDocu...ary/048459.pdf
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Nov 2019
    Posts
    13
    exactly what i needed, thanks

Similar Threads

  1. Auto On only turns on at full power
    By GG727 in forum Troubleshooting - Controls
    Replies: 0
    Last Post: 12-09-2020, 01:20 PM
  2. Maestro MACL-153M Dimmer NOT TURNING OFF - Flashes/Blinks instead
    By mattlabbie in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 05-27-2019, 06:13 AM
  3. No Power to Hunter Fan With Maestro MACL-LFQ
    By mathyou in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 03-23-2019, 12:25 PM
  4. Maestro dimmers strobing (not flickering, full on/off cycle!!)
    By mcsull in forum Troubleshooting - Controls
    Replies: 5
    Last Post: 03-18-2016, 07:48 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •