and also GRX-TVI modules? If so, where in the software are they?I've almost completed the Ra2 Level 1 Online Training class and they are discussed in section 3.01 but I'm using the software in training mode and unable to locate them as I "practice" specifying everything in the Lutron software.A bit more info...I've decided to move away from Insteon for a new studio we're building and evaluating RA2 as an alternative. The current design for the main work space is illuminated with about 475 watts (72 ft @ 6.6 watts per foot of LED strips) for 70,000 lumens/~100 ft candles on 6 Zurik EMLV drivers. I do have two circuits that run to each driver location and a place in the circuit to hide two dimmers so I could go that route with a a pair of 250w dimmers controlled by a keypad but the second circuit was intended for future task/accent lighting so I'd like to leave that 2nd circuit open if possible which is why I think the PHPM module could be a great solution. Just not sure I would have access to program it with my Essentials version of the software.Thanks.