Having a completely brain freeze on this so forgive me if its a simple solution.I have a client that is off mains water in Africa and has a borehole and pump feeding a small 1500l water tank.We want to programme this into the Lutron via Time clock for switching on the borehole pump and a 2 wire contact closure float switch for triggering a QSE-IO to switch off the zone controlling the pump. But I cant get my head around how to assign the float switch into the QSE-IO input tab. Incidentally, I also need to assign an input from the Victron Invertor system CCO to a QSE-IO so that I can load shed and prohibit the borehole running when there is no electric supply and we are running on battery but that principle should be the same. Many Thanks in advance A