Hi everyone, I bought a refurbished caseta kit on Amazon with a smart dimmer, hub and pico remote. I installed the dimmer and it's working great! But, I can't get the bridge to connect. I've been at this all day. My bridge is the BDG-1 (L-BDGPRO). Below are the things I tried to make it work. 1. Replaced the ethernet cable. 2. Power cycled my router and the hub 3. Uninstalled the Caseta app and recreated an account, did that a couple of times 4. Tried to enter demo mode on the app (doesn't work) 5. Uninstalled DDWRT and reversed to the factory firmware of my router (WRT32X) 6. Disabled firewall and gave the hub a static local IP 7. Tried to connect on my iPad 8. Held the hub's black button for 10, 20, 30 seconds (it doesn't do anything) 9. Did the press 3 times, on the third press hold for 10 seconds and press 3 times again, it doesn't do anything, i.e. no change in the lights. I do see the bridge on my router's dashboard or when I scan the network using Fling. Can anybody help me? This is getting over my head.