Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Help installing new TGCL-153P, not dimming

  1. #1
    Junior Member
    Join Date
    Jan 2021
    Posts
    2

    Help installing new TGCL-153P, not dimming

    Hello, I'm trying to install a new TGCL-153P in a single pole application. This is not my first time using this switch and have had no issues in other locations. However it is the first single pole application. I verified that the light works correctly with a standard single pole switch. I am also using an incandescent bulb to avoid LED issues. When I wire in the dimmer, using the copper and brass on the bottom of the switch (i.e. the copper and the brass on the opposite side of the switch from the copper screw), The switch is non-functional (light will not turn on). If I use the brass screw on the same side as the copper one, then the switch works (light turns on) but in reverse. If I switch the wires the switch still works in reverse. In no configuration does the dimmer work at all. Am I doing something wrong? Did I just get a bad switch? Any suggestions would be appreciated. Thanks!

  2. #2
    Junior Member
    Join Date
    Jan 2021
    Posts
    2
    Wanted to follow up, I called Lutron support and the switch is bad. I'll be returning it.

Similar Threads

  1. Replies: 3
    Last Post: 06-18-2020, 10:59 PM
  2. TGCL-153P vs TGCL-153PH - successor products?
    By ffejrekabrub in forum General Discussion - Controls
    Replies: 1
    Last Post: 11-22-2019, 08:31 PM
  3. Tgcl-153ph-iv
    By Wholtw@gmail.com in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 04-23-2019, 01:44 PM
  4. Lutron TGCL-153P
    By Bruce5334 in forum General Discussion - Controls
    Replies: 1
    Last Post: 02-17-2019, 12:02 PM
  5. Replies: 1
    Last Post: 11-19-2018, 12:30 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •