Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Incorrect operation with 3 Way system with Maestro Dimmer and on/off switch

  1. #1
    Junior Member
    Join Date
    Oct 2015
    Posts
    1

    Question Incorrect operation with 3 Way system with Maestro Dimmer and on/off switch

    We have a newly installed LED system with Maestro MACL-153MLH-WH dimmer in a 3 way system with 7 Halo RL560WH6927R LED cans. Other switch is a standard 3 way switch. Having trouble where if lights are turned off at the dimmer, they will not turn on at the other switch, and if lights are turned off at the other switch the dimmer will not turn them on. What is the problem and how would I fix?

  2. #2
    Senior Member
    Join Date
    Oct 2015
    Posts
    100
    Quote Originally Posted by Don W View Post
    We have a newly installed LED system with Maestro MACL-153MLH-WH dimmer in a 3 way system with 7 Halo RL560WH6927R LED cans. Other switch is a standard 3 way switch. Having trouble where if lights are turned off at the dimmer, they will not turn on at the other switch, and if lights are turned off at the other switch the dimmer will not turn them on. What is the problem and how would I fix?
    This is mostly a wiring problem. I suggest you shut down electricity in the entire premise and perform a wire sniffing to make sure the wire colors match on all ends of the 3-way system circuit. Very important to shut down all the circuits, all of them, prior to testing.

  3. #3
    Katie H.
    Guest
    Don W,

    This is a simple wiring issue. The MACL-153M-XX wiring requires that you change one wire location on the mechanical switch. There is also a simple programming step that needs to be completed. Please click here for updated wiring instructions. Step 6a will walk you through the correct wiring and step 9 walks you through the necessary programming.

    If you have any questions or need some assistance with this installation, please call 1-844-LUTRON1 to speak with one of our Technical Support Representatives.

Similar Threads

  1. Maestro C.L Dimmer wired with a standard 3 way switch.
    By Blair S. in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 06-08-2017, 11:19 AM
  2. System Operation/Limitation Questions
    By ekimla in forum Design Assistance - CAS
    Replies: 9
    Last Post: 08-08-2016, 03:34 PM
  3. Maestro dimmer sensor not functioning with Maestro dimmer
    By TyZee in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-03-2015, 01:20 PM
  4. Maestro Family/RR2/MWF Non-CL and CFL as Switch?
    By schalliol in forum General Discussion - Controls
    Replies: 0
    Last Post: 07-25-2014, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •