Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: 4 way switch

  1. #1
    Junior Member
    Join Date
    Jan 2021
    Posts
    1

    4 way switch

    Need help. 4 way switch...installed MACL and MA-R (2 of them). Not working...

  2. #2
    Administrator
    Join Date
    Sep 2018
    Posts
    87
    Hi Tonka38,Thanks for your post!When installing the MACL-153M with two MA-R companion dimmers in a 4-way application, it is important to remember that all of the blue screws will need to be connected. We would normally recommend using the red traveler wire for the blue screws in this application. The black and gold screws can either have your power or load wires going through it and it should work fine. You can find a wiring diagram for this application @ https://www.lutron.com/TechnicalDocu...93_Page_15.pdf . If you are still running into issues with your application or your wiring does not match the wiring in the diagram, please give us a call @ 1-888-588-7661

Similar Threads

  1. Dimming Switch and Fan Control Switch in same switch box
    By trickiegt in forum Troubleshooting - CAS
    Replies: 4
    Last Post: 01-12-2021, 10:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •