Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Want my existing Lutron Switch, only Smart (Wi-Fi-enabled)

  1. #1
    Junior Member
    Join Date
    Dec 2020
    Posts
    3

    Want my existing Lutron Switch, only Smart (Wi-Fi-enabled)

    Hello;In 2008, I installed a ceiling fan in a vaulted ceiling. Inside the fan is a receiver that controls the fan speed and light dimmer. The old fan had a separate Red wire and Black wire going from the switch to the fan. I am pretty sure we disconnected and capped the Red wire, leaving only the Black wire connected to the Receiver in the fan and the Lutron integrated fan and light switch. A great setup!!! The existing Lutron switch has Line Power to it and one Black wire going to the Receiver in the fan. Somehow, the Lutron Switch must be communicating with the Receiver to control both lighting and fan speed.Moving to 2020, I want to control the fan from Google or Alexa. Currently, I believe Lutron only makes separate Smart Fan Speed Control and Light Dimmer switches. Using 2 Smart Switches is no problem. However, I suspect Lutron does NOT make Smart Switches that are compatible with my existing switch to receiver. https://www.lutron.com/en-US/Product.../Overview.aspx know that I can bypass the Receiver and simply use the the Red and Black wires as Load controls for the Light and Fan, but that means I have to get up into a very high ceiling fan to do the rewiring. It would be GREAT if there were a switch exactly like the existing switch only it could be Wi-Fi enabled to be controlled. Am I dreaming? What is the best way to solve this problem?Thanks,Paul

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    As noted in the other post, the receiver has to go. Lutron no longer makes any fan control compatible with a receiver.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    Dec 2020
    Posts
    3

    Appreciate the response

    Thank you for the info!

Similar Threads

  1. Any Smart Bulbs compatable with Lutron Smart Bridge
    By m11rphy in forum General Discussion - CAS
    Replies: 7
    Last Post: 12-19-2023, 08:06 AM
  2. Multi-way Lutron Maestro with Smart Switch
    By zipykido in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 10-29-2020, 08:46 PM
  3. Need wiring help when replacing Lutron DV switch with Lutron smart dimmer
    By sillysnail in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-11-2020, 08:55 PM
  4. DVCL vs Existing Switch Wiring - WTF/Help!
    By LBPickering in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-16-2019, 11:47 PM
  5. Lutron switch, control, and smart bridge
    By joeratman in forum General Discussion - Controls
    Replies: 2
    Last Post: 07-16-2017, 11:18 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •