Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Looking Homeworks QS rs232 raw commands sample

  1. #1
    Junior Member
    Join Date
    Aug 2020

    Looking Homeworks QS rs232 raw commands sample

    Hi looking for raw commands for dim high and low I,m doing in rs232 coz I can't use the IP driver due to network restriction unable to connect to RTI. This is the sample commands that work for on and off #DEVICE,9,401,7,1\r\n Thanks The setup I have QSE-CI-NWK-E, QSNE-2DALI-D, and QSE-CI-AP-D

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Thank you for your post Alfred.

    We would recommend taking a look at our Integration Protocol guide found here at It has all the commands you would need to send for the lights. Hope this helps!

Similar Threads

  1. J. Geiger Shades - Anyone have a sample program
    By DSinSF in forum General Discussion - HWQS
    Replies: 8
    Last Post: 09-15-2021, 11:06 AM
  2. Lutron and Homeworks QS commands
    By akcirc in forum 3rd-party Integration - Shades
    Replies: 1
    Last Post: 03-01-2018, 12:47 AM
  3. Code for Hunter Douglas Silhoutte shades on Homeworks QS via RS232 and R2D7
    By KSchweser in forum 3rd-party Integration - HWQS
    Replies: 3
    Last Post: 12-13-2017, 03:26 PM
  4. HWI Legacy support sample design
    By digit1 in forum Design Assistance - HWQS
    Replies: 9
    Last Post: 08-12-2015, 10:51 AM
  5. Extron via RS232 or ethernet to change HomeWorks QS scene setting
    By hkfiresoul in forum 3rd-party Integration - HWQS
    Replies: 10
    Last Post: 02-11-2015, 10:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts