Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: RRD-6ND backward operation

  1. #1

    RRD-6ND backward operation

    We have a RRD-6ND in a 4way application with 2 companion dimmers. On the 6ND when the lower toggle is pressed the light level increases but when the raise toggle is pressed the light level decreases. The switch is operating in reverse. Both of the companion dimmers work normally and the app functions normally. Has anyone else run into this issue? This house seems to be getting all of 'the firsts'

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Make sure you have power-in on the black and out to the load/next device on the brass (for all 3 devices).

    Neutral devices generally need to go at the end where the wire goes up to the light.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Senior Member
    Join Date
    Jan 2019
    Posts
    342
    Seems stupid, but make sure the dimmer isn't upside down. I would think miswiring would cause other issues besides the inverted rocker.

Similar Threads

  1. Switch Operation is Reversed
    By chuckc3 in forum Troubleshooting - Controls
    Replies: 20
    Last Post: 03-06-2023, 09:41 AM
  2. Graphic Eye & GRX-RV operation
    By Philip in forum General Discussion - Legacy Other
    Replies: 9
    Last Post: 07-15-2020, 11:08 AM
  3. RAMC 5W Master Operation
    By Mark Ald in forum Programming - Legacy RA
    Replies: 2
    Last Post: 03-08-2020, 11:23 PM
  4. Fan operation
    By alexdobert in forum General Discussion - CAS
    Replies: 1
    Last Post: 03-04-2020, 09:18 AM
  5. Single pole operation reversed
    By raini in forum General Discussion - Controls
    Replies: 2
    Last Post: 01-20-2020, 10:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •