Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Dimmer Issue with Power Loss

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Posts
    12

    Angry Dimmer Issue with Power Loss

    I am trying to setup my pico at the other switch location in a 3 way circuit. So far though I have not been able to disconnect the switch at that location without losing power to my In Wall Dimmer. Directions says to connect/cap all wires at that location except for ground. When I do this I lose power to the In Wall Dimmer. I have been trying to figure which combination of the wires at that location to connect to keep power constant to the dimmer but when using the multimeter I get 0 reading on every terminal. When I flip the switch I notice one direction gives power to my switch and the other direction kills the power to the switch. Also for some reason I have 5 wires on the 3 way switch I am trying to place the pico at. Each traveler has 2 wires and then the Common has 1.

  2. #2
    Junior Member
    Join Date
    Oct 2020
    Posts
    12
    SOLVED. Thought it out logically and fixed it. Sorry for the trouble. I tried deleting but I guess was past 5min limit.

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,122
    Glad we could help!
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Backup Pico in case Ra2 goes down due to internet/power loss with shades
    By blackknighti30 in forum General Discussion - RA2
    Replies: 4
    Last Post: 12-07-2020, 01:34 PM
  2. Dimmer issue
    By Stevenextstep in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 10-18-2020, 09:09 AM
  3. Lutron LQSE-4A-D Issue | Led Power Blinking
    By alghaziheru in forum Troubleshooting - HWQS
    Replies: 5
    Last Post: 10-29-2018, 05:57 AM
  4. Caseta Dimmer - at a loss
    By Lockeness in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 07-12-2017, 11:59 PM
  5. Power Loss or Processor File Upload?
    By vining in forum Programming - HWQS
    Replies: 2
    Last Post: 10-28-2016, 06:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •