Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Is Caseta compatible with Hi Lume 1% LED Drivers?

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Posts
    1

    Is Caseta compatible with Hi Lume 1% LED Drivers?

    I've googled, searched the forums, and read the manuals and have not been able to find a definitive answer:

    Is there a Hi Lume LED driver (such as LTEA4U1UKL-CV240) that is compatible with a Lutron Caseta switch (such as PD-5NE)?

    I am looking to power a set of 9' led strips (24V, around 38W total per strip) in undermount shelving using Hi Lume drivers, one 40W driver for each strip, both connected to a Caseta switch.
    Looking at the Hi Lume specifications and manuals, some list only Diva, Radio RA2, and other non-Caseta switches. Going through the forums, there is only a 2017 post discussing Hi Lume "A Series" or "L3D" drivers, saying that the "L3D" specifically will only work with Caseta if you wire them through an interface such as PHPM-3F-DV-WH.
    Looking at the full specifications for the 2020 Hi Lume 1% 2-Wire LED Driver (https://www.lutron.com/TechnicalDocu...369543_ENG.pdf) it lists both 2-wire and 3-wire Caseta switch options, but since it is discussing an entire family of Hi-Lume drivers, it is unclear which specific drivers are compatible with these switches. It is clear that certain Hi-Lume drivers only work with Ecosystem controls.

    Does anyone know the answer or where I could look to find out? Thank you!

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Call tech support. One of the options is ballast selection. They can help you chose the right driver and control.

    Caseta doesn't have a 3-wire dimmer which is why the one document said you would need the PHPM interface. There should be a 2-wire solution.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. Caseta Compatible Waterproof Outdoor Plug/Switch
    By MikeZ in forum General Discussion - CAS
    Replies: 15
    Last Post: 05-21-2020, 04:30 AM
  2. Sunnata touch dimmer compatible with Caseta
    By ghost974 in forum General Discussion - Controls
    Replies: 1
    Last Post: 11-21-2019, 09:43 AM
  3. Need Candelabra e12 LED bulbs compatible with Caseta dimmers
    By Intex in forum General Discussion - CAS
    Replies: 6
    Last Post: 06-22-2018, 04:29 AM
  4. Compatible LEDs flashing with Caseta dimmer
    By rsg123 in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 11-20-2017, 05:20 PM
  5. Caseta dimmer for ELV drivers?
    By Dimerize in forum General Discussion - CAS
    Replies: 1
    Last Post: 03-15-2016, 08:36 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •