I've googled, searched the forums, and read the manuals and have not been able to find a definitive answer:
Is there a Hi Lume LED driver (such as LTEA4U1UKL-CV240) that is compatible with a Lutron Caseta switch (such as PD-5NE)?
I am looking to power a set of 9' led strips (24V, around 38W total per strip) in undermount shelving using Hi Lume drivers, one 40W driver for each strip, both connected to a Caseta switch.
Looking at the Hi Lume specifications and manuals, some list only Diva, Radio RA2, and other non-Caseta switches. Going through the forums, there is only a 2017 post discussing Hi Lume "A Series" or "L3D" drivers, saying that the "L3D" specifically will only work with Caseta if you wire them through an interface such as PHPM-3F-DV-WH.
Looking at the full specifications for the 2020 Hi Lume 1% 2-Wire LED Driver (https://www.lutron.com/TechnicalDocu...369543_ENG.pdf) it lists both 2-wire and 3-wire Caseta switch options, but since it is discussing an entire family of Hi-Lume drivers, it is unclear which specific drivers are compatible with these switches. It is clear that certain Hi-Lume drivers only work with Ecosystem controls.
Does anyone know the answer or where I could look to find out? Thank you!