Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Vive control with crestron

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Posts
    2

    Vive control with crestron

    Hi i want to known if vive can be controlled by crestron by network commands (as by example homeworks o rra2)

  2. #2
    Lutron Technical Support
    Join Date
    Sep 2020
    Posts
    23
    Vive can work with BACnet and API's (Page 45 - https://www.lutron.com/TechnicalDocu...041571_Web.pdf), in order for that to happen you'll need a HJS-2 type Vive Hub (This is simply a software upgrade and can be purchased through a local rep). Does that make sense?

  3. #3

    Now port1 select source 1 Port1

    You can check this command.Cmd = 2 for set port mapping 0x12 0x4d 0x41 0x52 0x88 0x43 0x48 0xff 0x02 Port1 1 port 2 1 port3 1 port4 1 port5 1 port6 1 port7 1 port8 + checksum Port1~port8: source value from 1~8 0x80+source for close output port. Ex 0x81 port select source 1 but set close. Echo 0xaa If the port value is the same, the output port will keep the video. Add 0x10 to source. The output port will re trigger (including off/on and do hdcp) For example: Now port1 select source 1 Port1 = 0x01 : video not change Port1 = 0x01 : video turn off/on and do hdcp again. Please let me know the result...Thanks.
    Last edited by Adam K.; 11-03-2020 at 11:12 AM.

  4. #4
    Junior Member
    Join Date
    Nov 2020
    Posts
    1
    The Lutron Vive system is a simple and scalable wireless lighting control solution for new and existing ... and can access and collaborate on a project from different devices. commands between the physical network that the hub is connected.
    Last edited by Adam K.; 11-03-2020 at 11:11 AM.

  5. #5
    in order for that to happen you'll need a HJS-2 type Vive Hub (This is simply a software upgrade and can be purchased through a local rep). Does that make sense?
    Last edited by Adam K.; 11-03-2020 at 11:11 AM.

  6. #6
    Junior Member
    Join Date
    Oct 2020
    Posts
    2

    bacnet

    hi i want to know why i can't control lutron live with crestron.I have already connected the system via bacnet and with bacnet systems I can control the lights, but not with crestron.I want to know if their entire network is seen through the LAN or what communication they use so that they can communicate since when I check the lutron system I see a network number.I hope soon your answer, greetings

Similar Threads

  1. control QS shades from Crestron
    By Diflex in forum 3rd-party Integration - Shades
    Replies: 3
    Last Post: 08-09-2022, 11:48 AM
  2. Crestron control of RA2 QS Savoia shades
    By bob_loblaw in forum 3rd-party Integration - Shades
    Replies: 2
    Last Post: 09-09-2019, 10:47 AM
  3. Crestron control of single/multiple shades
    By jkvossen in forum 3rd-party Integration - Shades
    Replies: 4
    Last Post: 01-17-2017, 08:22 AM
  4. Crestron home automation to control sivoia qs
    By mahmoud in forum 3rd-party Integration - Shades
    Replies: 5
    Last Post: 03-16-2016, 09:20 AM
  5. Crestron shade control
    By PACHAWAII in forum 3rd-party Integration - HWQS
    Replies: 2
    Last Post: 05-08-2015, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •