Vive control with crestron

[John Castro]

Hi i want to known if vive can be controlled by crestron by network commands (as by example homeworks o rra2)

[Adam K.]

Vive can work with BACnet and API's (Page 45 - https://www.lutron.com/TechnicalDocu...041571_Web.pdf), in order for that to happen you'll need a HJS-2 type Vive Hub (This is simply a software upgrade and can be purchased through a local rep). Does that make sense?

[Alaskasworld]

You can check this command.Cmd = 2 for set port mapping 0x12 0x4d 0x41 0x52 0x88 0x43 0x48 0xff 0x02 Port1 1 port 2 1 port3 1 port4 1 port5 1 port6 1 port7 1 port8 + checksum Port1~port8: source value from 1~8 0x80+source for close output port. Ex 0x81 port select source 1 but set close. Echo 0xaa If the port value is the same, the output port will keep the video. Add 0x10 to source. The output port will re trigger (including off/on and do hdcp) For example: Now port1 select source 1 Port1 = 0x01 : video not change Port1 = 0x01 : video turn off/on and do hdcp again. Please let me know the result...Thanks.

[ksideji]

The Lutron Vive system is a simple and scalable wireless lighting control solution for new and existing ... and can access and collaborate on a project from different devices. commands between the physical network that the hub is connected.

[forexample046]

in order for that to happen you'll need a HJS-2 type Vive Hub (This is simply a software upgrade and can be purchased through a local rep). Does that make sense?

[John Castro]

hi i want to know why i can't control lutron live with crestron.I have already connected the system via bacnet and with bacnet systems I can control the lights, but not with crestron.I want to know if their entire network is seen through the LAN or what communication they use so that they can communicate since when I check the lutron system I see a network number.I hope soon your answer, greetings