I have a LiftMaster 8550WLB. I control it with the Lutron Visor Control Receiver via the output of the receiver. From the output of the Visor Control Receiver, I have connected a Universal Security Control Module (https://www.creativeaccesssolutions....dule_p_13.html) which then connects to the LiftMaster in the same plugs as the LiftMaster wall control.
Every now and again, when closing the OH door either using the Visor Control Transmitter or the LiftMaster Wall Control, the OH door will close then stop and then proceed to open. No errors are received on the LiftMaster wall control.
I had the garage door company come out for service and all of the tensions and such with the OH door are excellent and the tech lubricated and tested everything. Luckily, when the tech came out the he was able to reproduce the issue when he was opening and closing the OH door. After the tech left the issue did not arise for a few days and now it's back to the random issue of not closing all of the way (it will close, then stop and start to open).
I am troubleshooting to see if it is the Universal Security Control Module and am swapping my existing unit out for a new one to see if that is what is causing the issue.
Anyone else had issues like this?