Hello, how can 24x 150watt led bulbs be controlled at once with caseta witeless?
Hello, how can 24x 150watt led bulbs be controlled at once with caseta witeless?
Look at the PHPM-PA-120. I believe the Caseta dimmer can control 3 of them. You will want to use a neutral dimmer like the PD-10NXD.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com
I agree with Randy on the PHPM. I encourage you to double-check the wattage of your LED bulbs. 24 150W LEDs is a lot of LEDs. I can't recall the last time I saw something that big this side of a large commercial/institutional building.
You might be looking at incandescent equivalent wattage, not LED wattage.
Santa Barbara, CA
evan@homeelectronics.solutions
Even if it is a 150W incandescent equal, the initial inrush will most likely cause a fault or dimmer failure. @randyc is correct in recommending the PHPM-PA-120 power booster, and spec is no more than three per neutral wire dimmer.
Simple automation when DIY isn't working
intuitivehomecontrols@gmail.com
fb.me/intuitivehomecontrols