Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Pairing issue MRF2-6ND

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Posts
    1

    Pairing issue MRF2-6ND

    So I got demo kit which includes:
    MRF2-6ND
    LRF2-OCRB-P
    MRF2-3BRL

    Out of the box everything was operating as expected, but since I was planning to add another ceiling motion sensor LRF3-OCR2B-P and standard 6s way didn’t work. I did a full factory reset. After reset I was able to pair back LRF2-OCRB-P and extra PJ2-3BRL, but not MRF2-3BRL OR LRF3-OCR2B-P.
    I reset them to the factory defaults and changed batteries but still no luck.
    What am I doing wrong here?

  2. #2
    Quote Originally Posted by Stranger29 View Post
    So I got demo kit which includes: MRF2-6ND LRF2-OCRB-P MRF2-3BRL Out of the box everything was operating as expected, but since I was planning to add another ceiling motion sensor LRF3-OCR2B-P and standard 6s way didn’t work. I did a full factory reset. After reset I was able to pair back LRF2-OCRB-P and extra PJ2-3BRL, but not MRF2-3BRL OR LRF3-OCR2B-P. I reset them to the factory defaults and changed batteries but still no luck. What am I doing wrong here?
    Hi there, Is it actually and LRF3 sensor? If it is the 3 indicates the radio frequency the device operates and is not compatible with devices outside of that. I think the 3 is euro frequencies and operate in the 800mhz range rather than the 433mhz range. I am not aware of a way of changing this on the device as I believe its hardware is what determines this and not software/firmware. I hope this helps!

  3. #3
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,968
    Austin is correct. The LRF3 is factory set to a different frequency. It is not going to with any "2" series products.

    The MRF2-3BRL may also need to be reset to factory default. To reset:

    Triple-tap the on button, hold for 3 seconds, triple-tap again.

    I believe the only way to know if it worked is to try and pair it again.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. MRF2-3PD-3 Compatability
    By cjzida in forum Troubleshooting - RA2
    Replies: 1
    Last Post: 11-26-2019, 01:48 AM
  2. Mrf2-15aps-1
    By lpeniston in forum General Discussion - CAS
    Replies: 0
    Last Post: 06-18-2019, 01:06 PM
  3. MRF2-3PD work with RA2?
    By Corey in forum General Discussion - RA2
    Replies: 2
    Last Post: 07-07-2015, 04:46 PM
  4. Maestro Wireless MRF2-6CL with Philips Warm Glow
    By kalco in forum Performance Issues - LED
    Replies: 1
    Last Post: 04-30-2015, 11:22 AM
  5. Moving from Lutron MIR-600MT-WH/SP-600M to Maestro MRF2-6CL-WH for LEDs ?
    By talonts in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 12-11-2014, 05:08 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •