Thanks Thanks:  0
Likes Likes:  0
Results 1 to 4 of 4

Thread: 12.8 and Yellow Banner - Select Correct Phase

  1. #1

    12.8 and Yellow Banner - Select Correct Phase

    After upgrading to 12.8, all of my RRD-PRO's now have a yellow banner telling me to select correct phase from advanced settings



    I am using SYLVANIA General Lighting 74287 RT4 throughout the house on either RRD-PRO or RRD-8ANS. Current settings for the RRD-PRO's is:




  2. #2
    When I originally set these up I used the manufacturer's recommendation (https://www.mc-mc.com/ASSETS/DOCUMEN...ra-RT4-LED.pdf) to use ELV.

  3. #3
    Junior Member
    Join Date
    Sep 2020
    Posts
    9
    Hello,Thank you for your inquiry. That message is just a friendly reminder to check the phase of the dimmer to ensure it matches the specification of the LED fixture. The LED manufacturer will be able to provide if the dimmer should be using forward or reverse phase for the best dimming performance. Thank you!- Jonathan C.

  4. #4
    Thank you.

Similar Threads

  1. Caseta PD-5NE ELV Dimmer ...cant change phase
    By Fruzmatik in forum Troubleshooting - CAS
    Replies: 0
    Last Post: 04-10-2019, 08:42 PM
  2. Two Red Wires and One Yellow Wire
    By chicagoguy in forum Troubleshooting - CAS
    Replies: 0
    Last Post: 12-05-2018, 07:56 PM
  3. Phase control dimming PowPak
    By pscheetz in forum Design Assistance - Vive
    Replies: 2
    Last Post: 04-18-2016, 10:31 AM
  4. ms-a102 occupancy switch mysterious green/yellow wire
    By shortcircuit in forum General Discussion - Controls
    Replies: 1
    Last Post: 12-22-2015, 06:48 PM
  5. Reverse Phase Ceseta?
    By Scott29 in forum General Discussion - CAS
    Replies: 3
    Last Post: 05-01-2015, 03:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •