- I've got an RRD-PRO and an RD-RD.
- I have tried 2 different PROs and 2 different RDs always the same results.
- I have tried swapping the PRO and the RD (though PRO was supposed to be allowed on both sides, I thought).
- At the moment the line is coming in to the black on the RD-RD, brass goes to black wire and blue to red wire. Then onto the pro. Red wire-blue. Black wire to black. Load to brass.
I've, like, triple checked this by pulling and pushing the little safety switches and track what goes hot when.The RRD-PRO works just fine. The RD-RD is able to turn the light on. It is unable to dim. It is unable to turn the light off. I can turn it on with the rd-rd. turn it off with the pro. Then turn it on again with the RD-RD.
I have absolutely no idea what to try next. Other than checking my wiring for the 17th time, anyone have suggestions?
Thanks all!