I bought all the required pieces to do a 3 location install and I believe I've followed them to the letter. The PD-6ANS is in Location 1, the other 2 have pico remotes and are capped off as of these instructions:
https://www.casetawireless.com/docum...ced%20inst.pdf Pages 51-55. This is an almost new home with new wiring and a neutral wire.With the first run through the light won't come on and there is no green LED on the switch. I thought I maybe messed up with step 8 regarding which black wire to connect to the red from the switch so I reversed them. With that setup the light stays on and will not go back off. The only thing I'm not super sure of is which neutral feed to connect to in the box itself. There are multiple coming in. Tomorrow I will try the other 3 to see if that's the issue. Any help would be greatly appreciated but I'm certain I've followed every other instruction.