Thanks Thanks:  0
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: One or more zones are always “full on” and zone intensity is not adjustable

  1. #1
    Junior Member
    Join Date
    Oct 2015
    Posts
    1

    One or more zones are always “full on” and zone intensity is not adjustable

    Hello,

    I have a QSGRJ-6P. Very nice gear by the way.

    I had a short in zone number 2 and it was tripping the main 30 Amp breaker, so we checked and fixed the problem with the short, but now when I turn the Grafik Eye on again, zone number 2 is always at 100% and it is not dimming anymore.

    Do you think the driver is blown and needs to be repaired? Or since it had a short in that zone, it needs to be "reset" somehow. The other 5 zones work just fine.

    Have you ever had this kind of problem?

    Thanks!

  2. #2
    Senior Member
    Join Date
    Sep 2013
    Posts
    424
    It sounds like zone 2 is permanently damaged.
    I believe your only option is to replace the entire QSGRJ-6P.

  3. Likes Kevin P. liked this post

Similar Threads

  1. Adjustable fade rates for Caseta dimmer?
    By Jacob in forum Programming - CAS
    Replies: 28
    Last Post: 06-14-2018, 02:29 AM
  2. Progamming DMX zones in HomeWorks QS
    By Craig W. in forum Programming - HWQS
    Replies: 2
    Last Post: 10-18-2017, 11:56 AM
  3. Keypad Back Light Intensity
    By mcignarella in forum Troubleshooting - HWQS
    Replies: 11
    Last Post: 09-18-2014, 08:05 AM
  4. Replies: 0
    Last Post: 03-20-2014, 12:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •