Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Looking Homeworks QS rs232 raw commands sample

  1. #1
    Junior Member
    Join Date
    Aug 2020
    Posts
    2

    Looking Homeworks QS rs232 raw commands sample

    Hi looking for raw commands for dim high and low I,m doing in rs232 coz I can't use the IP driver due to network restriction unable to connect to RTI. This is the sample commands that work for on and off #DEVICE,9,401,7,1\r\n Thanks The setup I have QSE-CI-NWK-E, QSNE-2DALI-D, and QSE-CI-AP-D

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post Alfred.

    We would recommend taking a look at our Integration Protocol guide found here at https://www.lutron.com/TechnicalDocu...ary/040249.pdf. It has all the commands you would need to send for the lights. Hope this helps!

Similar Threads

  1. Lutron and Homeworks QS commands
    By akcirc in forum 3rd-party Integration - Shades
    Replies: 3
    Last Post: 08-09-2022, 02:56 PM
  2. J. Geiger Shades - Anyone have a sample program
    By DSinSF in forum General Discussion - HWQS
    Replies: 8
    Last Post: 09-15-2021, 10:06 AM
  3. Code for Hunter Douglas Silhoutte shades on Homeworks QS via RS232 and R2D7
    By KSchweser in forum 3rd-party Integration - HWQS
    Replies: 3
    Last Post: 12-13-2017, 02:26 PM
  4. HWI Legacy support sample design
    By digit1 in forum Design Assistance - HWQS
    Replies: 9
    Last Post: 08-12-2015, 09:51 AM
  5. Extron via RS232 or ethernet to change HomeWorks QS scene setting
    By hkfiresoul in forum 3rd-party Integration - HWQS
    Replies: 10
    Last Post: 02-11-2015, 09:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •