Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Adding a new Keypad to an older Grafik Eye QS

  1. #1
    Junior Member
    Join Date
    Oct 2020
    Posts
    1

    Adding a new Keypad to an older Grafik Eye QS

    I've got a system we installed 10 years ago that includes a QSG-6P120 6 zone Grafik Eye and (2) 2 button keypads. I've added a 7 button keypad to the system and went through the local programming to set it for zones 1-7 but it doesn't seem to work. Anything specific I'm missing here? It enters programming mode, I save the settings on the Grafik Eye, it exits programming mode, I can then select the scene buttons 1-7 but they don't do anything. The Grafik Eye and 2 other keypads still work fine.Thank you, John

  2. #2
    Senior Member
    Join Date
    Dec 2013
    Posts
    317
    Is this a standalone Grafik Eye or part of the Homeworks QS system? If it's part of the system, you have to program it through Homeworks and not locally...maybe someone else with more experience with graifk eyes cna chime in but from what I've seen, out of the box, they default to "dumb" and any keypad on the link can control any other grafik eye on the link so you either have to program them locally or through the system but not both.

Similar Threads

  1. Wall plate won't fit Grafik T keypad?
    By atmatthewat in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 08-31-2020, 03:29 PM
  2. Adding GRAFIK T Dimmer to project
    By TRH00 in forum Programming - RA2
    Replies: 1
    Last Post: 02-09-2020, 12:21 PM
  3. Replies: 3
    Last Post: 04-23-2018, 12:52 PM
  4. Adding GRAFIK Eye QS to RadioRA2 system
    By Corey in forum General Discussion - RA2
    Replies: 1
    Last Post: 04-10-2015, 11:21 PM
  5. Adding a keypad to RadioRa2 system - electrical requirements?
    By geofry in forum Design Assistance - RA2
    Replies: 5
    Last Post: 09-30-2014, 06:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •