Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: RA2 select dimmers interference risk

  1. #1
    Junior Member
    Join Date
    Aug 2020
    Posts
    10

    RA2 select dimmers interference risk

    Hi,In the kitchen/open plan living area, I'm planning on 7 circuits, so 7 in-line dimmers.Is it possible to put them all in one of the kitchen wall cabinets, for future access, in case 10 years down the line they need a battery change.Would they interfere with each other if they are placed together?What is the plan for circa 10 years time when they run out of battery?Thanks,Raj

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,104
    Quote Originally Posted by rajsh View Post
    Hi,In the kitchen/open plan living area, I'm planning on 7 circuits, so 7 in-line dimmers.Is it possible to put them all in one of the kitchen wall cabinets, for future access, in case 10 years down the line they need a battery change.Would they interfere with each other if they are placed together?What is the plan for circa 10 years time when they run out of battery?Thanks,Raj
    RA2 does NOT use a mesh network so you can place them side-by-side. I would try and keep them at least 1M from repeaters. Typically, Lutron does not address the battery issue. I have several clients with older processors. I take the processors to a local nerd shop and they solder in new batteries. I'd do it myself but lithium (?) batteries require some special technique or they explode.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Senior Member
    Join Date
    Jul 2015
    Posts
    165
    Which RA2 dimmers have batteries in them? I know Pico remotes have batteries, but I wasn't aware that any dimmers had batteries.

Similar Threads

  1. Replies: 2
    Last Post: 04-21-2020, 11:42 PM
  2. Is RRD-6D-XX dimmers compatible with RA2 select?
    By SparkyCoog in forum General Discussion - RA2
    Replies: 2
    Last Post: 11-05-2018, 09:32 PM
  3. Replies: 2
    Last Post: 09-24-2018, 08:49 PM
  4. WiFi interference
    By Francimj in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 06-12-2018, 04:41 PM
  5. Dimmers for CSL Downlight using RA2 select system
    By topiary in forum Design Assistance - RA2
    Replies: 0
    Last Post: 05-16-2018, 03:11 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •