Thanks Thanks:  0
Likes Likes:  0
Results 1 to 2 of 2

Thread: Caseta Dimmer Switch work with Alexa commands, but will not work using buttons

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Posts
    1

    Caseta Dimmer Switch work with Alexa commands, but will not work using buttons

    I have a PD-6WCL Dimmer Switch. The switch will not turn on the light. I see the green LED on the switch move up, but the light does not come on. However, I can ask Alexa to turn on the light and it comes on. Even with Alexa commands, though, I get a quick flash on the light and then it comes on full. I did not always have this problem. It started around 10 months after installation. Any help would be appreciated.

  2. #2
    Lutron Technical Support
    Join Date
    Aug 2019
    Posts
    182
    What type of lighting load is on the dimmer. If LED, are they confirmed compatible on the following site? https://www.lutron.com/en-US/Pages/L...atibility.aspx It is possible after use that an LED burns in and starts to show incompatibility as you are describing if it truly has not been tested and approved. Have you tried an incandescent bulb on the dimmer to see if it behaves the same way?

Similar Threads

  1. Replies: 1
    Last Post: 07-04-2020, 08:37 PM
  2. Caseta Switch seems to work but doesn't turn on lights
    By mgchan in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 11-15-2019, 04:55 AM
  3. What dimmer/switch will work for 450 Watt LED loads?
    By ghurty in forum General Discussion - RA2
    Replies: 5
    Last Post: 10-02-2019, 11:48 AM
  4. Alexa and caseta - won’t work with any commands
    By Grubster in forum 3rd-party Integration - CAS
    Replies: 6
    Last Post: 01-13-2019, 01:19 PM
  5. Caseta PD-6ANS Switch will not work with 5 leds but works fine with 4.
    By AlwaysSomething2Fix in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 11-12-2018, 09:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •