Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: wiring problem for LECL-153P

  1. #1
    Junior Member
    Join Date
    Jul 2020
    Posts
    1

    wiring problem for LECL-153P

    I am trying to replace a DVEL/V-300P dimmer with a LECL-153P dimmer and am having a problem with the wiring. I believe this is wired as a single pole switch since no other switch controls this fixture. But the old switch has 3 wires connected. The box contains a white and two black wires (one slightly larger than the other). On the original dimmer, white was connected to white, black to the smaller black and the yellow wire to the larger black. The wiring diagram for the old switch indicated that the wire connected to black was the hot line. This worked fine. The new dimmer has red, white and red/white wires but the instructions for it show leaving the red/white wire unconnected. I already blew up one switch, so I want to get it right next time!

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,959
    Quote Originally Posted by brollins View Post
    I am trying to replace a DVEL/V-300P dimmer with a LECL-153P dimmer and am having a problem with the wiring. I believe this is wired as a single pole switch since no other switch controls this fixture. But the old switch has 3 wires connected. The box contains a white and two black wires (one slightly larger than the other). On the original dimmer, white was connected to white, black to the smaller black and the yellow wire to the larger black. The wiring diagram for the old switch indicated that the wire connected to black was the hot line. This worked fine. The new dimmer has red, white and red/white wires but the instructions for it show leaving the red/white wire unconnected. I already blew up one switch, so I want to get it right next time!
    The DVELV dimmer required a neutral connection, the LECL does not. Just cap off the white wire.

    If you are using the LECL as a single-pole (single location) control, cap off the red/white wire. Power in should connect to the black and the wire going to the lights should connect to the red.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Junior Member
    Join Date
    Aug 2020
    Posts
    4

    WhatsAppSniffer Free Download

    WOW..!! Best wishes for sharing with us, https://whatsappsnifferapk.com/downl...p-sniffer-apk/

Similar Threads

  1. LECL-153 or CTCL-153
    By Ed_Audio in forum General Discussion - LED
    Replies: 2
    Last Post: 12-15-2018, 01:43 AM
  2. Replies: 1
    Last Post: 11-19-2018, 01:30 PM
  3. Pd-6wcl-wh wiring problem
    By JonnyMac in forum Troubleshooting - CAS
    Replies: 2
    Last Post: 07-12-2018, 04:39 PM
  4. Mixed load on PD-6ANS or PD-6WCL problem. Wiring issue?
    By istredd in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 02-16-2018, 09:46 AM
  5. Wiring problem lights only turn on through Lutron switch
    By justin1236 in forum Troubleshooting - CAS
    Replies: 14
    Last Post: 01-11-2017, 02:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •