Originally Posted by
evankirkhart
I think that could work quite well. Using normally closed switches in series or normally open in parallel. If you can find normally closed switches that sounds easier. I would do a dimmer just to have the fade on/off (seems like high $$$ job so insignificant cost for high cool factor). Could also do 6ND for lower cost, depending on driver situation. It is probably best to remote this dimmer if possible to avoid confusion, and have these lights be completely automatic in nature. Adding this load to other scenes should be ok but could result in unexpected behaviors. Same goes with controlling the load in the app. Should be fine, might not be. Hope this helps!