Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Multi Location Dimmer Install

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Multi Location Dimmer Install

    I installed the 2 companion dimmers with no issue. However, when I went to install the master controller and pulled the existing switch, it has 4 screws on the switch with 2 red and 2 black wires going to it and no ground.Please describe how I would connect to your controller. MACL 153MLRHW.

  2. #2
    Administrator
    Join Date
    Sep 2018
    Posts
    82
    Hello larklight,Please see page 2 of the wiring diagram @ https://www.lutron.com/TechnicalDocu...93_Page_15.pdf for a good visualization of the wiring. You'll want to take both of your red wires and attach to the blue terminal screw -> YOU WANT TO WRAP ONE AROUND THE TERMINAL SCREW AND PUNCH THE OTHER IN RIGHT NEXT TO IT.You'll take one black wire and connect it to the brass terminal screw and the other black wire to the black terminal screw --> DOESN'T MATTER WHICH GOES ON WHICH.If you have any issues with this installation, please reach out to us at our 24/7 technical support team @ 1-888-Lutron1 (588-7661) Hope this helps! -Justin F.

Similar Threads

  1. Maestro multi-location dimmer memory no longer functions
    By tvwearing in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 04-19-2019, 10:28 PM
  2. Does it matter which location you install the dimmer in a 3-way?
    By zrjrj in forum General Discussion - Controls
    Replies: 1
    Last Post: 03-03-2019, 12:05 AM
  3. Replies: 3
    Last Post: 01-17-2018, 11:12 AM
  4. Pico Dimmer Switch and Smart Switch in a multi-location setup
    By jbaude in forum General Discussion - CAS
    Replies: 1
    Last Post: 11-08-2017, 04:06 PM
  5. Grafik T Multi Location Dimmer doesn't work
    By modkris in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 02-14-2017, 04:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •