Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: Dimmer Mistake

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Lightbulb Dimmer Mistake

    I have a Lutron MA-L3S25. I unfortunately installed lights that do not dim...my mistake. I changed it, however the switch now does not work. There are three blinking lights constantly on the light switch portion but I cannot "reset" the switch. What do I do?? Please help.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,875
    Quote Originally Posted by regrock100 View Post
    I have a Lutron MA-L3S25. I unfortunately installed lights that do not dim...my mistake. I changed it, however the switch now does not work. There are three blinking lights constantly on the light switch portion but I cannot "reset" the switch. What do I do?? Please help.
    The dimmer side of that device has a 40 watt minimum load. If you are using LEDs you are probably below the minimum load. Lutron makes a capacitor (LUT-MLC) that might help. They used to say it was only for switches but sometimes they say try it with a dimmer.
    LED, Incorporated
    Raleigh, NC 27614

  3. #3
    Administrator
    Join Date
    Sep 2018
    Posts
    84
    Hi regrock100,It sounds like you might be using LEDs with this Lutron control, unfortunately this control is not rated for LED lighting loads. We would recommend ensuring you are only using incandescent or halogen lighting loads with this Lutron control.Hope this helps! -Justin F.

Similar Threads

  1. Easy Way to find a Switch that got moved by mistake?
    By PaulHagen in forum Programming - RA2
    Replies: 1
    Last Post: 06-06-2018, 11:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •