Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Lutron Motion Sensor

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Lutron Motion Sensor

    I tried to install the Lutron Motion sensor switch and I think I am doing something wrong, I can only get half my lights to turn off. My box has three black wires but there is only two black wires on the back of the switch, so I figured I would wire nut two of my black wires to one of the black wires on the back of the switch and then my other black wire I connected to the other black wire on the switch. in doing so only half my lights will turn off the other half stay on. Has anyone had this issue before? What was the solution?

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by dsalvagni View Post
    I tried to install the Lutron Motion sensor switch and I think I am doing something wrong, I can only get half my lights to turn off. My box has three black wires but there is only two black wires on the back of the switch, so I figured I would wire nut two of my black wires to one of the black wires on the back of the switch and then my other black wire I connected to the other black wire on the switch. in doing so only half my lights will turn off the other half stay on. Has anyone had this issue before? What was the solution?
    Normally there is a single wire going up to the lights. It sounds like you may have 2. Connect the other black to the output of the switch.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. How to use my caseta lutron with a motion sensor ?
    By atraxi in forum General Discussion - Controls
    Replies: 1
    Last Post: 09-06-2019, 02:25 PM
  2. Motion Sensor Too Sensitive
    By Dangerus in forum Troubleshooting - Controls
    Replies: 2
    Last Post: 04-15-2019, 07:44 PM
  3. Lutron Caseta motion sensor lights
    By Squill in forum General Discussion - CAS
    Replies: 23
    Last Post: 05-08-2018, 10:12 AM
  4. Motion sensor question, some on & more off?
    By wkearney99 in forum Programming - RA2
    Replies: 4
    Last Post: 03-05-2015, 07:59 AM
  5. Motion sensor Overide
    By mdfeather in forum Programming - RA2
    Replies: 2
    Last Post: 11-17-2013, 07:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •