Thanks Thanks:  1
Likes Likes:  1
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: how to find device id of a shade?

  1. #1
    Junior Member
    Join Date
    Jan 2015
    Posts
    3

    how to find device id of a shade?

    I logged into putty,

    how do I find the device ID for a shade, so i can input it into control4?

  2. #2
    Senior Member
    Join Date
    May 2013
    Posts
    420
    Hey Alex.
    The command you can send to get a print out of all devices on the link is ?details,all_devices.

  3. #3
    Junior Member
    Join Date
    Jan 2015
    Posts
    3
    is it only by trial and error i know which ID goes to which blind? For example, im using the radio ra2 or pico to raise and lower the blinds and it will give me a number

  4. #4
    Senior Member
    Join Date
    May 2013
    Posts
    420
    My apologies, I thought you were integrating with a Sivoia QS wired shade system.
    Yes, it would be trial and error. Unless the serial numbers on the tags of the shades were documented and referenced to a name. If this is integrating through a Ra2 system, you can also reference the integration id that is assigned to the shades for control. The Ra2 software has the capability to generate an integration report.

  5. Thanks wkearney99 thanked for this post
    Likes wkearney99 liked this post

Similar Threads

  1. I can't find an Illumination software download?
    By MaineRandy in forum Programming - Legacy HW
    Replies: 6
    Last Post: 03-29-2016, 01:34 PM
  2. Cant find Main Repeater
    By Armando B. in forum Troubleshooting - RA2
    Replies: 9
    Last Post: 04-27-2015, 12:57 PM
  3. Also Cannot Find Main Repeater
    By Brian P in forum Troubleshooting - RA2
    Replies: 2
    Last Post: 11-18-2014, 02:07 AM
  4. I can't find an Illumination software download?
    By MaineRandy in forum General Discussion - HWQS
    Replies: 3
    Last Post: 11-03-2014, 11:18 AM
  5. Can't find how to enable remote access
    By ChrisK in forum Troubleshooting - RA2
    Replies: 7
    Last Post: 11-26-2013, 11:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •