I have installed three new Quest 6 inch dimmable canless recessed lights.
12 Pack 6" Inch Canless LED Downlight with Junction Box; 9W=(80W Equivalent) 40,000 Life Hours; Dimmable to 5%; Wet Location Rated; 700 Lumens; 120V; CRI>90; 5 Year Warranty; Daylight 5000K https://www.amazon.com/dp/B07889DDPP..._8DA5EbZ2099S7
Lutron Maestro LED+ Dimmer for Dimmable LED, Halogen and Incandesent Bulbs | Single-Pole or Multi-Location | MACL-153M-WH | White https://www.amazon.com/dp/B008X3CHM0..._yNA5Eb7GCQVR3
I utilized the Lytton MACL 153M and the three lights I have installed work great in a 3way configurations. With that said at some settings I get feedback ghosting in another room on lights that are on a different switch but seems to be the same breaker. This goes away when I turn off the Lutron MACL or dim that switch completely.
The lights in the other room are an older can style with LED conversation, I plan to replace these with the same lights and switch later down the road. Until then I am still looking for a solution to eliminate the ghosts and voltage feedback in to other areas of the circuit I am unsure what would cause this to feed power in to another run of lights. Any help would be great.