Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Lurton MACL-153M

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Lurton MACL-153M

    I have installed three new Quest 6 inch dimmable canless recessed lights.

    12 Pack 6" Inch Canless LED Downlight with Junction Box; 9W=(80W Equivalent) 40,000 Life Hours; Dimmable to 5%; Wet Location Rated; 700 Lumens; 120V; CRI>90; 5 Year Warranty; Daylight 5000K https://www.amazon.com/dp/B07889DDPP..._8DA5EbZ2099S7

    Lutron Maestro LED+ Dimmer for Dimmable LED, Halogen and Incandesent Bulbs | Single-Pole or Multi-Location | MACL-153M-WH | White https://www.amazon.com/dp/B008X3CHM0..._yNA5Eb7GCQVR3

    I utilized the Lytton MACL 153M and the three lights I have installed work great in a 3way configurations. With that said at some settings I get feedback ghosting in another room on lights that are on a different switch but seems to be the same breaker. This goes away when I turn off the Lutron MACL or dim that switch completely.

    The lights in the other room are an older can style with LED conversation, I plan to replace these with the same lights and switch later down the road. Until then I am still looking for a solution to eliminate the ghosts and voltage feedback in to other areas of the circuit I am unsure what would cause this to feed power in to another run of lights. Any help would be great.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    It sounds like a compatibility issue. Unfortunately there are no standards for LEDs. Every manufacturer is different and they even vary designs between model numbers. The MACL is designed for replacement bulbs. You can try adjusting the trim or switching to the MA-PRO. The PRO has a neutral connection which sometimes helps with these issues.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

Similar Threads

  1. 4 way using macl-153m
    By k9jws in forum General Discussion - Controls
    Replies: 3
    Last Post: 06-29-2020, 04:10 PM
  2. MACL-153M not working
    By Ericalbert in forum Troubleshooting - Controls
    Replies: 4
    Last Post: 10-24-2018, 01:22 AM
  3. MACL-153M
    By Chris M in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 07-11-2018, 09:03 PM
  4. Radios RA2 with MACL-153M
    By PaulWebster in forum General Discussion - RA2
    Replies: 2
    Last Post: 07-08-2018, 12:08 PM
  5. Troubles with MACL-153M / MA-L
    By GoTTi in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 02-04-2017, 12:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •