Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Need DIVA fan control wiring help

  1. #1
    Junior Member
    Join Date
    Jun 2020
    Posts
    1

    Need DIVA fan control wiring help

    Hello, I have a toggle switch/on or off switch that delivers power to the hunter ceiling fan. I control the fan speed and light on the ceiling fan. The wall switch has a ground, neutral and hot wire. I purchased a lutron DIVA DVFSQ-LF which has a hot wire (red) which controls the fan, yellow which controls the light, and green wire (ground). So, I have 3 wires on switch side and 4 wires on the lutron side. Maybe I can do away with one wire but I am not sure. Please advise.THanks !

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    87
    Hello Brill,Thank you for your Post! The DVFSQ-LF requires you to have two separate wires or "switched legs" that run from the wallbox up to the fan/light combo for independent control of each. It sounds like per your description you had a single switch that would deliver power to both the light kit and fan motor and the wiring you described sounds like there is only one wire that runs up to the fan. Unfortunately, you would need to run an additional wire in order for the DVFSQ-LF to function. Hope this info helps! -JustinF.

Similar Threads

  1. Diva 153PH Remote Control Question
    By duckfield in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 08-24-2019, 02:28 PM
  2. Replies: 2
    Last Post: 02-27-2019, 11:36 AM
  3. Wiring Question - Fan Spped Control (No Light)
    By mlbrady30 in forum General Discussion - Controls
    Replies: 3
    Last Post: 12-05-2018, 09:44 AM
  4. Diva DVFSQ-LFH fan control and light switch to only connect to fan
    By Velthrian in forum General Discussion - Controls
    Replies: 1
    Last Post: 09-07-2018, 02:30 PM
  5. MA-LFQHW Alternative for LED dual fan/light control on Single Pole wiring?
    By jjtrinva in forum General Discussion - Controls
    Replies: 1
    Last Post: 08-16-2017, 11:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •