Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Vive system with pick and rmjs-16r-dv-b dimming module

  1. #1
    Junior Member
    Join Date
    Oct 2018
    Posts
    2

    Vive system with pick and rmjs-16r-dv-b dimming module

    Today I installed a few rmjs-16r-dv-b dimming modules controlled by some pico remotes. They are controlling some 40 watt LED flat panels. (This is on a commercial building.) The first room has two modules and two picos, each controlling 10 fixtures. They work correctly. The next room has one module and one pico controlling 3 lights and one module and 3 picos controlling 9 lights. The lights will not turn off completely. They are dimmed very low. The next four rooms are doing the exact same thing. I have tried everything I know to do...1. Switched wires2. checked for loose connections on the 10vdc wires3. Added lights to increase the load. 4. Added them to the vive hub and tried to adjust the Low trim 5. Tried to turn off using the RMJS button6. Tried resetting factory settings to the RMJS7. Checked for loose neutrals8. Checked for stray voltagesI spent over four hours today and 4 out of the 5 rooms will not turn turn completely off. Any advice will be greatly appreciated.Thanks,Peacemaker

  2. #2
    Junior Member
    Join Date
    Oct 2018
    Posts
    2
    Sorry PICO...not pick.

  3. #3
    Junior Member
    Join Date
    Apr 2019
    Posts
    9

    Vive Man

    Good Morning Citizen,It sounds like you have a wiring issue. The fixtures in question are all 0-10 volt correct? If they are all 0-10 volt, are you only using the RMJS-16R-DV-B to control fixtures? As a test, remove the output of the RMJS-16R-DV-B, cap it, and then reapply power at the breaker to see if the lights still come on.

  4. #4
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,963
    Quote Originally Posted by peacemaker View Post
    Today I installed a few rmjs-16r-dv-b dimming modules controlled by some pico remotes. They are controlling some 40 watt LED flat panels. (This is on a commercial building.) The first room has two modules and two picos, each controlling 10 fixtures. They work correctly. The next room has one module and one pico controlling 3 lights and one module and 3 picos controlling 9 lights. The lights will not turn off completely. They are dimmed very low. The next four rooms are doing the exact same thing. I have tried everything I know to do...
    1. Switched wires
    2. Checked for loose connections on the 10vdc wires
    3. Added lights to increase the load.
    4. Added them to the vive hub and tried to adjust the Low trim
    5. Tried to turn off using the RMJS button
    6. Tried resetting factory settings to the RMJS
    7. Checked for loose neutrals
    8. Checked for stray voltages

    I spent over four hours today and 4 out of the 5 rooms will not turn turn completely off. Any advice will be greatly appreciated.

    Thanks,
    Peacemaker
    The 16R is a relay/non-dim module. You may need to do something to the 10v input on the fixtures to get them to be non-dim. In some cases it is just shorting the 10v + and - connection. Check with the fixture manufacturer.

    If you do want to dim you will need one of the 8T modules.

    10v systems are polarity sensitive. If you have one fixture reversed it will kill the whole lot.
    LED, Incorporated
    Raleigh, NC 27614

  5. #5
    Junior Member
    Join Date
    Nov 2020
    Posts
    2

    Lutron Caseta and Lutron RMJS-8T-DV-B Vive PowPak Dimming Module

    I don’t believe the Vive PowPaks are compatible with Caseta. They work with Pico remotes, some occupancy sensors, and the Vive hub only as far as I know. Unfortunately the Vive hub is really expensive...over $1000 US
    Last edited by Adam K.; 11-03-2020 at 12:14 PM.

  6. #6
    Junior Member
    Join Date
    Nov 2020
    Posts
    2
    Thanks for the comment

Similar Threads

  1. PowPak® Dimming Module question
    By Radio777 in forum General Discussion - CAS
    Replies: 2
    Last Post: 05-13-2020, 03:08 PM
  2. Replies: 2
    Last Post: 05-28-2019, 11:14 AM
  3. Multiple Light Dimming with PowPak RMJS-8T-DV-B?
    By Beardog in forum General Discussion - Vive
    Replies: 2
    Last Post: 07-14-2018, 03:32 PM
  4. RadioRA2 + RF Dimming Module
    By Blumoopy in forum Troubleshooting - RA2
    Replies: 13
    Last Post: 12-05-2017, 12:09 AM
  5. HW-RPM-4A dimming module testing rig with RRD-F6AN-DV-WH
    By ShineOnLED in forum General Discussion - HWQS
    Replies: 6
    Last Post: 07-03-2017, 02:02 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •