Thanks Thanks:  0
Likes Likes:  0
Results 1 to 3 of 3

Thread: Delay with PD-10NXD 3-way with a Mechanical Switch

  1. #1
    Junior Member
    Join Date
    May 2020
    Posts
    2

    Delay with PD-10NXD 3-way with a Mechanical Switch

    Hello!I have just finished replacing about 15 switches in my house with Caseta dimmers, and they are working like a champ. I just added a 3 way using a PD-10NXD and a mechanical switch, however I am seeing a 1-2 second delay when the lights are turned off from the mechanical switch. When turning the lights on from the mechanical switch the delay is much less. I was hoping someone had some tips! Everything from the caseta dimmer works as expected.Thanks,Mike.

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    2,587
    Quote Originally Posted by mhill View Post
    Hello!I have just finished replacing about 15 switches in my house with Caseta dimmers, and they are working like a champ. I just added a 3 way using a PD-10NXD and a mechanical switch, however I am seeing a 1-2 second delay when the lights are turned off from the mechanical switch. When turning the lights on from the mechanical switch the delay is much less. I was hoping someone had some tips! Everything from the caseta dimmer works as expected.Thanks,Mike.
    The 10NXD is looking for a change in state on the blue wire/terminal. It sounds like when you flip the 3-way you are removing power from the 10NXD. When power is restored it takes a few seconds to power back up. Long way of saying check the wiring.
    Convergence Technologies Raleigh, North Carolina
    www.convergenceusa.com

  3. #3
    Junior Member
    Join Date
    May 2020
    Posts
    2
    Thanks @randyc! The delay I am seeing is on turning the light of vs turning it on. It turns on with a small delay but no where near as much as turning it off.

Similar Threads

  1. 4-way with Mechanical Switch
    By schneideris in forum Troubleshooting - CAS
    Replies: 6
    Last Post: 05-28-2020, 12:47 AM
  2. Lights on delay with PD-6ANS-WH switch
    By jwhitley in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 07-31-2019, 01:18 AM
  3. Can PD-5NE be used with a mechanical toggle switch in a two switch setup?
    By donb6 in forum General Discussion - Controls
    Replies: 1
    Last Post: 07-12-2017, 04:25 PM
  4. Delay with PD-6ANS-WH switch on florescent bulbs
    By xxedgexx in forum Troubleshooting - CAS
    Replies: 1
    Last Post: 10-02-2016, 09:44 PM
  5. 3-Way with Mechanical Switch | Pro
    By Tucker1 in forum Troubleshooting - CAS
    Replies: 5
    Last Post: 02-08-2016, 11:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •