Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5

Thread: Homeworks Illumination Control Somfy Universal RTS Interface II (URTSI II-16 Channel)

  1. #1
    Junior Member
    Join Date
    May 2015
    Posts
    16

    Homeworks Illumination Control Somfy Universal RTS Interface II (URTSI II-16 Channel)

    Hello,Has anyone used a Somfy Universal RTS Interface II (URTSI II-16 Channel) with their HomeWorks Illumination. I am looking for any RS232 code to control the shades with this unit.Thank you,JR

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post gaspower.

    You can find the RS232 integration protocol here at http://www.lutron.com/TechnicalDocum...20Protocol.pdf. This is the integration protocol for HomeWorks Illumination.

  3. #3
    Junior Member
    Join Date
    May 2015
    Posts
    16
    Thank you very much for the link.JR

  4. #4
    Junior Member
    Join Date
    May 2015
    Posts
    16
    Hello Josh,Thank you for the link to the manual. Sorry, but I am lost on this one. There must be some sort of driver to add to the processor? Currently I am using single Somfy Universal RTS Receiver Control for each shade controlled by a CCO by Lutron. This was easy as the Lutron Homeworks processor can see the CCO board. Do you know how to make the HW to see the RS232 16 channel RTS interface. I think you need to import a driver. Thank you

  5. #5
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Hello gaspower

    We would recommend emailing in to hwsupport@lutron.com. From there we can provide more support to help get this resolved for you.

Similar Threads

  1. HomeWorks Illumination 2-Way Communication With RTI Control
    By gaspower in forum 3rd-party Integration - Legacy HW
    Replies: 1
    Last Post: 06-22-2019, 09:50 AM
  2. Universal Remote Control & Caseta
    By Goneboating in forum 3rd-party Integration - CAS
    Replies: 16
    Last Post: 04-24-2019, 02:33 PM
  3. RRA2 with Somfy RTI interface
    By joedo98 in forum Troubleshooting - RA2
    Replies: 3
    Last Post: 06-19-2015, 10:44 PM
  4. Using HomeWorks QS to Control a HomeWorks Illumination System
    By Armando B. in forum 3rd-party Integration - HWQS
    Replies: 9
    Last Post: 01-23-2015, 04:31 PM
  5. Universal Remote Control Dimmers and conversion to Radio Ra 2?
    By tonydutt in forum 3rd-party Integration - RA2
    Replies: 1
    Last Post: 11-24-2014, 09:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •