I put in the Lutron dimmers on a 4 way and when you turn them on sometimes they flash once per second. Then if you turn up the dimmer they work fine. Any idea on adjustments I tried to raise the trim and still doesn’t work.
I put in the Lutron dimmers on a 4 way and when you turn them on sometimes they flash once per second. Then if you turn up the dimmer they work fine. Any idea on adjustments I tried to raise the trim and still doesn’t work.
I can't be sure without knowing the model number of your dimmer. Mechanical dimmers (Diva, Skylark, etc.) have to be at the beginning or end of the circuit. Electronic dimmers (like Maestro) can go at any position but require companion dimmers in place of the other switches. If the electronic dimmer has a neutral it has to be at the end where the wire goes up to the light.
There could be a compatibility issue with the bulbs.
Convergence Technologies Raleigh, North Carolina
www.convergenceusa.com