Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4

Thread: Problem with cool master and homeworks

  1. #1

    Exclamation Problem with cool master and homeworks

    Hi everyone!I'm integrating cool master net with palladiom thermostat but the comunication is not bi-directional, palladiom always displays the same temperature, how can I get the real temperature and display it on thermostat?

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post Javier.

    We do have an app note on this integration setup found here at http://www.lutron.com/TechnicalDocum..._with_HWQS.pdf. We would recommend following this setup. If you run into issues we would recommend emailing into hwsupport@lutron.com. Hope this helps!

  3. #3
    Junior Member
    Join Date
    Jul 2020
    Posts
    1

    Palladiom Room temp problem

    Hi Javier,

    Do you fixe the Room temperature problem?

    Is it possible?

    Thanks,

    Don

  4. #4
    Junior Member
    Join Date
    Apr 2021
    Posts
    2
    Has there been any determination on this issue? I'm having the same problem of 1-way Lutron to Coolmaster communication only as well.

Similar Threads

  1. Replies: 3
    Last Post: 04-19-2021, 10:53 AM
  2. RAMC 5W Master Operation
    By Mark Ald in forum Programming - Legacy RA
    Replies: 2
    Last Post: 03-08-2020, 11:23 PM
  3. Homeworks QS 10.0, problem with the extract tool.
    By franmejias in forum General Discussion - HWQS
    Replies: 1
    Last Post: 06-16-2016, 04:22 PM
  4. Minimum cool set point
    By jdiaz in forum Programming - HWQS
    Replies: 1
    Last Post: 01-20-2015, 11:55 AM
  5. Homeworks QS RF keypad problem
    By Peter Licht in forum Troubleshooting - HWQS
    Replies: 3
    Last Post: 11-08-2013, 04:00 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •