Cadets Occupancy sensor and home app

[floridaboy]

I have a home with 52 caseta devices plus a HomeKit enabled alarm system that works great with SiRi commands. I just setup the new Caseta occupancy/motion sensor to control the laundry room lights. I see the sensor in the lutron app however I do not see it at all in the IOS Home app with all of my other devices. I also don’t see how to add additional devices to take an action even in the lutron app? I’m other words when motion or occupancy is detected I want turn on three different lights that are connected to lutron caseta dimmer switches ?

[JaxFLBear]

The new Caseta Occupancy Sensor is not exposed to HomeKit. You have to use the Lutron app to select which lights get turned on/off by the occupancy sensor.

[JaxFLBear]

Apparently, you can't select which lights you want to control. Looks like it only does those assigned to the same room within the Lutron app.

[randyc]

Apparently, you can't select which lights you want to control. Looks like it only does those assigned to the same room within the Lutron app.

You should add that to the features request. It seems like it might be cool to have the breakfast lights come on when you enter the kitchen. Or maybe have the hall lights come on when you walk up the stairs.