Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: I want a 3-way with motion sensors at separate locations.

  1. #1
    Junior Member
    Join Date
    Apr 2020
    Posts
    1

    I want a 3-way with motion sensors at separate locations.

    I want a 3-way with motion sensor for my stairwell lighting. The stairs make a 180 degree turn halfway down. The goal is for the tread lighting to be triggered when someone comes up the stairs from the bottom location or goes down from the top location. Can I wire two MSCL-OP153MH-WH switches in a 3-way configuration to do this? This way there is a motion sensor at each location. Is there a better way? Thanks. -

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Posts
    1,885
    Quote Originally Posted by MachoNick View Post
    I want a 3-way with motion sensor for my stairwell lighting. The stairs make a 180 degree turn halfway down. The goal is for the tread lighting to be triggered when someone comes up the stairs from the bottom location or goes down from the top location. Can I wire two MSCL-OP153MH-WH switches in a 3-way configuration to do this? This way there is a motion sensor at each location. Is there a better way? Thanks. -
    No. You can only have 1 sensor per circuit. Lutron makes stand alone motion sensors (Radio Powr Savr) that can control RadioRA 2, RA2 Select and Caseta (as long as they are not assigned to a Caseta bridge). They have wall, hall, corner and ceiling mount versions.
    LED, Incorporated
    Raleigh, NC 27614

Similar Threads

  1. 2 x MSCL-OP153MH-WH Question for 3 way application
    By Dallas129 in forum Troubleshooting - Controls
    Replies: 1
    Last Post: 10-21-2019, 01:04 PM
  2. Maestro Model# MSCL-OP153MH-WH
    By Tymntgmry in forum Performance Issues - LED
    Replies: 0
    Last Post: 07-09-2019, 08:51 PM
  3. Need A19 LED for Maestro C_L MSCL-OP153MH
    By vazper in forum Compatibility - LED
    Replies: 1
    Last Post: 02-17-2019, 01:32 PM
  4. MSCL-OP153MH - will not turn off (ever). Will not enter programming mode
    By A Jarrell in forum General Discussion - Controls
    Replies: 7
    Last Post: 08-29-2018, 08:09 AM
  5. MSCL-OP153MH at a 4-way switch and MA-RR Companion at a 3-way dead-end
    By paulpv in forum Troubleshooting - Controls
    Replies: 3
    Last Post: 01-23-2017, 06:56 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •