Originally Posted by
dougcoleman
Using Essentials 12.6. I have a room that has a ceiling fixture controlled by a conventional 3 way switch. I changed the devices to a RRD-6CL and RD-RD. Now I am in the design portion of software. I see the device listed as a standalone CA-1PS. It is the left device in a duplex box and is now the 6CL. It's mate in the kitchen (RD-RD) is 3rd of 4 in a quad box. Doesn't seem to be so easy to edit and change the type of device to a dimmer. The pull down list only shows non dimmed loads and I can't see how to change the device model. It isn't a pull down. I can delete it and add as new, but now it is shown to the right of the other device in the duplex box. So it seems like I have to delete that device and add both back so they end up in the correct order? Same in with the mate three way in the kitchen? I could simply delete and add the devices: There is no engraving or other report that is really going to effect functionality. But that annoys me. This seems like I am missing something and there is a easier way to do this.