Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2

Thread: Hybrid repeater wiring (Not Daisy Chain?) - HQS -

  1. #1
    Junior Member
    Join Date
    Nov 2013
    Posts
    2

    Hybrid repeater wiring (Not Daisy Chain?) - HQS -

    I'm adding several RF devices in an accessory building on the grounds of a multiple processor HWQS project. There are two links dedicated to HQR-REP-120's and both have at least one free address. The "out building" is about 220' away, and we have a wire through conduit to this building. Unfortunately, I would have to "T-Tap" as there is no return wire to make the connection a daisy chain. My question is: What happens if they aren't wired in daisy chain? This design would have it go from the processor to a nearby HQR (#1), then it would essentially have #2 and the new one #3 in parallel. I have the option of powering #3 with the transformer or from the wire... power shouldn't be the issue but, #2 is in a location that requires that it be powered from the processor's link. Thanks... and feel free to txt if easier: 614.940.8097Matt JonesScene-Scape LLCColumbus, OH.

  2. #2
    Authorized Lutron Contributor
    Join Date
    Sep 2018
    Posts
    238
    Thank you for your post cmjones70.

    We would recommend following the spec sheet and install guide of using daisy chain wiring. Unfortunately we would not be able to recommend any other wiring configuration.

Similar Threads

  1. Hybrid repeater antenna
    By oldguy in forum Best Practices - HWQS
    Replies: 5
    Last Post: 03-23-2019, 12:06 PM
  2. Hybrid Repeater and device activation
    By totesthouse in forum Best Practices - HWQS
    Replies: 3
    Last Post: 02-20-2018, 11:55 AM
  3. Lumaris undercabinet lights, lens sagging at daisy-chain connections
    By Neurorad in forum General Discussion - LED
    Replies: 11
    Last Post: 06-05-2017, 11:56 AM
  4. Daisy Chain HWQS Keypads
    By DavidGroves in forum Design Assistance - HWQS
    Replies: 2
    Last Post: 08-04-2016, 07:49 AM
  5. Wiring Hybrid Repeaters
    By Armando B. in forum Design Assistance - HWQS
    Replies: 0
    Last Post: 04-18-2014, 04:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •