I'm adding several RF devices in an accessory building on the grounds of a multiple processor HWQS project. There are two links dedicated to HQR-REP-120's and both have at least one free address. The "out building" is about 220' away, and we have a wire through conduit to this building. Unfortunately, I would have to "T-Tap" as there is no return wire to make the connection a daisy chain. My question is: What happens if they aren't wired in daisy chain? This design would have it go from the processor to a nearby HQR (#1), then it would essentially have #2 and the new one #3 in parallel. I have the option of powering #3 with the transformer or from the wire... power shouldn't be the issue but, #2 is in a location that requires that it be powered from the processor's link. Thanks... and feel free to txt if easier: 614.940.8097Matt JonesScene-Scape LLCColumbus, OH.